Burst pipe flooding your kitchen or bathroom
We shut off the water, extract standing water with truck-mounted units, and dry the structure with air movers and dehumidifiers. We also check behind walls with a boroscope to find hidden moisture.
24/7 emergency water removal and rapid drying for homes and businesses
Water extraction company in Studio City, California
When water is pouring into your home, you need a water extraction company in Studio City, California that answers the phone at 2 a.m. and rolls a truck within the hour. We pull standing water, dry the structure, and document everything for your insurance claim. From burst pipes in Studio City Hills to sewage backups near Tujunga Village, we handle the mess so you can focus on your family.
Careful work. Honest options.
About this service
What a water extraction company in Studio City, California does
A water extraction company in Studio City, California is a licensed restoration contractor that removes standing water from your home or business, then dries the structure to prevent mold and structural rot. We use truck-mounted extraction units, moisture meters, and thermal imaging cameras to find water you can't see behind walls and under floors. Every job follows the ANSI/IICRC S500 standard for water damage restoration. We're not just pumping water; we're saving your drywall, your wood subfloor, and your indoor air quality.
Studio City homes face a specific set of water problems. The 2026 rainy season brought over 18 inches of rain to the San Fernando Valley, and older homes near Laurel Canyon often have clay sewer lines that crack under root pressure. A burst pipe behind a kitchen wall can dump 10 gallons a minute. That's why a water removal company Studio City residents trust needs to be local, stocked, and ready. We carry desiccant dehumidifiers and air movers on every truck, so drying starts the moment extraction ends.
- ✓ 60-minute emergency response
- ✓ Insurance documentation included
- ✓ IICRC-certified drying standards
- ✓ Mold prevention from day one
What's included
What our water extraction service includes
Every water extraction job includes the essentials: emergency response, moisture mapping, extraction, drying, and documentation. We also offer add-ons like mold remediation, duct cleaning, and repairs. Here's what you get as standard.
✓
24/7 emergency dispatch
We answer the phone around the clock and dispatch a truck immediately. You get a text with the technician's name and ETA. Most Studio City calls get a 60-minute arrival window, even on weekends and holidays.
✓
Moisture mapping and inspection
A certified technician uses a moisture meter, thermal imaging camera, and hygrometer to find all wet areas. We check behind baseboards, under floors, and inside walls. You see the readings and understand the scope before we start.
✓
Water extraction and removal
We use truck-mounted extraction units and submersible pumps to remove standing water. We extract from carpets, hardwood, concrete, and crawl spaces. Extraction typically takes 2 to 4 hours for an average room.
✓
Drying and dehumidification
We place Dri-Eaz air movers and Phoenix dehumidifiers to dry the structure. Desiccant dehumidifiers handle tight spaces. We monitor with hygrometers daily and adjust equipment. Most homes dry in 3 to 5 days.
✓
Antimicrobial treatment
We apply antimicrobial solution to affected areas to prevent mold growth after water damage. This is standard on every job, not an add-on. We also run air scrubbers with HEPA filters to capture airborne spores.
✓
Insurance documentation
You receive a complete documentation package with moisture readings, photos, and a scope of work in Xactimate format. We bill your insurance directly and work with your adjuster. Most homeowners pay only their deductible.
How it works
Our water extraction process, step by step
01
Emergency call
You call (833) 321-7153 and speak to a real person, not a voicemail. We ask what happened, where the water is, and whether the source is stopped. Within minutes we dispatch the nearest truck. You get a text with the technician's name and ETA. Most calls in Studio City get a 60-minute arrival window.
02
Inspection and moisture mapping
A certified technician walks the property with a moisture meter and thermal imaging camera. We check behind baseboards, inside walls, and under floors. We map every wet area and categorize the water (clean, gray, or black). You see the readings and understand the scope before we start.
03
Water extraction
We run truck-mounted and portable extraction units to pull standing water from carpets, hardwood, and concrete. For deep water, we use submersible pumps first. Extraction typically takes 2 to 4 hours for an average room. We don't stop until the moisture meter shows the bulk water is gone.
04
Drying and dehumidification
We place Dri-Eaz air movers and Phoenix dehumidifiers to dry the structure. Desiccant dehumidifiers handle tight spaces like crawl spaces and closets. We monitor with hygrometers daily and adjust equipment. Most homes dry in 3 to 5 days. You get daily updates on moisture readings.
05
Final verification and report
Once readings match dry standard, we remove equipment and take final photos. You receive a complete documentation package for your insurance claim. We also walk you through any repairs needed, like drywall or baseboard replacement. If you need a contractor, we can refer a licensed one.
Tools & methods
Tools and methods we use for water extraction
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Truck-mounted water extraction unit
Pulls hundreds of gallons per minute from carpets and hard surfaces. We use these on every job for fast bulk water removal.
Thermal imaging camera
Detects hidden moisture behind walls and under floors without cutting into drywall. We use it during the initial inspection.
Moisture meter and hygrometer
Measures moisture content in wood, drywall, and air. We use these to map wet areas and confirm when the structure is dry.
Dri-Eaz air movers
High-velocity fans that evaporate moisture from surfaces. We place them strategically to dry walls, floors, and ceilings.
Phoenix dehumidifier
Pulls moisture from the air to speed drying. We use desiccant models for crawl spaces and tight areas.
Boroscope
A camera on a flexible rod that lets us see inside walls and ceiling cavities without demolition. We use it to find hidden water.
Air scrubber
Runs HEPA filtration to capture airborne mold spores and dust. We use these during extraction and drying to protect indoor air quality.
Real results
Before and after.
Burst pipe in a Colfax Meadows ranch home
Before
A supply line under the kitchen sink burst at 2 a.m. Water soaked the hardwood floor, cabinets, and drywall. The homeowner called us and we arrived in 50 minutes. Standing water was 1 inch deep across 300 square feet.
After
We extracted the water in 3 hours, set 6 air movers and 2 dehumidifiers, and dried the structure in 4 days. Moisture readings returned to normal. The homeowner's insurance covered $4,200 in repairs minus the deductible.
Sewage backup in a Tujunga Village duplex
Before
A clay sewer line cracked from root intrusion, causing sewage to back up into a downstairs bathroom and hallway. The tenant called us at 7 p.m. The affected area was 200 square feet, including carpet and baseboards.
After
We extracted the sewage, removed contaminated carpet and padding, and sanitized with antimicrobial solution. Drying took 5 days. The landlord's insurance covered $6,800, and the tenant was back in the unit within a week.
Roof leak in a Studio City Hills home
Before
Heavy rain exposed a roof flashing failure. Water ran down inside the wall and stained the ceiling in two rooms. The homeowner noticed the stain but didn't know the extent. Our thermal camera found moisture in 120 square feet of ceiling and wall.
After
We extracted water from the ceiling cavity, removed wet insulation, and dried the area in 3 days. We replaced the drywall and repainted. The total cost was $3,500, covered by insurance.
Problems we solve
Water problems we solve for Studio City homeowners
From burst pipes to sewage backups, we've seen it all. Here are the most common water emergencies we handle in Studio City and how we fix them.
Ask a pro →↗
Sewage backup in your basement or crawl space
Our sewage cleanup team extracts the water, removes contaminated materials, and sanitizes with antimicrobial solution. We follow ANSI/IICRC S500 standards for black water and run air scrubbers to clear the air.
Slab leak soaking your hardwood floors
We use thermal imaging and moisture meters to locate the leak. After a plumber fixes the pipe, we extract water from under the floor and dry the slab. We also treat the area with antimicrobial solution.
Roof leak staining your ceiling
We find the source, extract water from the ceiling cavity, and dry the area. If drywall is damaged, we remove and replace it. We also check the attic for mold growth after water damage.
Proof you can check
Licensed, certified, and reviewed
✓
IICRC WRT (Water Restoration Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC ASD (Applied Structural Drying)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC AMRT (Applied Microbial Remediation Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
EPA Lead-Safe CertifiedU.S. Environmental Protection Agency
✓
California State License Board (CSLB) C-61/D-53California State License Board
Most residential water extraction jobs in Studio City run $500 to $2,500 in 2026, depending on the area affected and water category. A single room with clean water might be $500 to $900. A whole-floor sewage backup can exceed $3,000. We provide a written estimate before work begins and bill your insurance directly when covered.
Look for IICRC certification, local dispatch, and direct insurance billing. We hold IICRC WRT and ASD certifications, operate 24/7 from Studio City, and work with all major carriers. We've completed over 1,200 extractions since 2021. Call (833) 321-7153 and we'll give you a straight answer about your situation.
Extraction itself takes 2 to 4 hours for an average room. Full drying takes 3 to 5 days. We monitor moisture daily and don't pull equipment until readings meet the dry standard. If your home has hardwood or thick carpet padding, drying may take 5 to 7 days. We give you a timeline after the initial inspection.
Yes. We work with all major insurance carriers and bill them directly. We document moisture readings, photos, and a scope of work in Xactimate format. You typically pay only your deductible. We've helped hundreds of Studio City homeowners get claims approved without hassle. Call us and we'll walk you through the process.
More services
Related Services
flood restoration servicesWhen a storm or burst pipe floods your Studio City home, our flood restoration services go beyond extraction. We remove water, dry the structure, and repair damaged drywall, flooring, and insulation. We handle everything from the first pump-out to the final paint touch-up.Explore →
emergency water removalWater doesn't wait for business hours. Our emergency water removal team is on call 24/7 in Studio City. We arrive with truck-mounted extraction units and start pulling water immediately. Most calls get a 60-minute response, even on holidays.Explore →
mold remediation after water damageIf water sat for more than 48 hours, mold may already be growing. Our IICRC AMRT-certified technicians handle mold remediation after water damage under the ANSI/IICRC S520 standard. We contain the area, remove affected materials, and run air scrubbers to clear the air.Explore →
water leak restorationA slab leak or burst pipe behind a wall can soak your framing for weeks before you notice. Our water leak restoration service finds the source with thermal imaging, extracts hidden water, and dries the structure. We also repair damaged drywall and baseboards.Explore →
emergency water cleanupFrom toilet overflow cleanup to appliance failure, our emergency water cleanup team handles the mess fast. We extract water, apply antimicrobial solution, and set drying equipment. You get a clean, dry home and full documentation for your insurance claim.Explore →
water extractionOur core service. We use truck-mounted water extraction units and submersible pumps to remove standing water from carpets, hardwood, and concrete. Every job follows ANSI/IICRC S500 standards. We don't leave until moisture readings confirm the structure is dry.Explore →
water damage mitigationMitigation means stopping the damage from getting worse. We extract water, remove wet materials like carpet padding and insulation, and set up drying equipment. Acting fast on water damage mitigation in Studio City prevents mold and saves thousands in repairs.Explore →
toilet overflow cleanupA toilet overflow can release 2 to 5 gallons of contaminated water in minutes. Our team extracts the water, sanitizes the area with antimicrobial solution, and disposes of affected materials. We handle the mess so you don't have to.Explore → Ready when you are
Call our water extraction company in Studio City, California
Water damage doubles in cost every hour you wait. We answer 24/7, arrive in about 60 minutes, and bill your insurance directly. Call now and we'll stop the water, extract it, and start drying today.
Call Now (833) 321-7153 →
Request an appointment
Call or message our Studio City crew
Reach us any hour at (833) 321-7153 for emergency water removal, extraction, or drying. We answer live, day or night, and dispatch a crew right away. For non-emergency estimates, email info@waterdamagerestorationstudiocity.com and we will get back to you the same business day.
Call anytime(833) 321-7153Email the officeinfo@waterdamagerestorationstudiocityca.shop
Office hoursOpen 24 hours · 7 days a week